| Terminal Type | |
| Applicability | All HVAC zones |
|---|---|
| Definition |
A terminal unit includes any device serving a zone (or group of zones collected in a thermal block) that has the ability to reheat or recool in response to the zone thermostat. This includes:
|
| Units | List (see above) |
| Input Restrictions | As designed |
| Baseline Rules | [bookref id="baseline-building-HVAC-terminal-devices"] specifies the HVAC terminal device for each of the baseline building systems. See [bookref id="hvac-mapping"] for a summary of the HVAC mapping. |
[table title="Baseline Building HVAC Terminal Devices" id="baseline-building-HVAC-terminal-devices"]
| Baseline building System | Terminal Type |
| System 1 – PTAC | None |
| System 2 – PTHP | None |
| System 3 – PSZ-AC | None |
| System 4 – PSZ-HP | None |
| System 5 – Packaged VAV with Reheat | VAV Box |
| System 6 – Packaged VAV with PFP boxes | Parallel Fan-Powered VAV Box |
| System 7 – VAV with Reheat | VAV Box |
| System 8 – VAV with PFP boxes | Parallel Fan-Powered VAV Box |
| Terminal Type | |
| Applicability | All HVAC zones |
|---|---|
| Definition |
A terminal unit includes any device serving a zone (or group of zones collected in a thermal block) that has the ability to reheat or recool in response to the zone thermostat. This includes:
|
| Units | List (see above) |
| Input Restrictions | As designed |
| Baseline Rules | Table 6.6.2-1 specifies the HVAC terminal device for each of the baseline building systems. See Figure 6.1.2-1 for a summary of the HVAC mapping. |
Table 6.6.2-1: Baseline Building HVAC Terminal Devices
| Baseline building System | Terminal Type |
| System 1 – PTAC | None |
| System 2 – PTHP | None |
| System 3 – PSZ-AC | None |
| System 4 – PSZ-HP | None |
| System 5 – Packaged VAV with Reheat | VAV Box |
| System 6 – Packaged VAV with PFP boxes | Parallel Fan-Powered VAV Box |
| System 7 – VAV with Reheat | VAV Box |
| System 8 – VAV with PFP boxes | Parallel Fan-Powered VAV Box |
| System 9 – Heating and Ventilation | None |
| System 10 – Heating and Ventilation | None |
|
Terminal Type |
|
|---|---|
|
Applicability |
All HVAC zones |
|
Definition |
A terminal unit includes any device serving a zone (or group of zones combined in a thermal block) that has the ability to reheat or recool in response to the zone thermostat. This includes:
|
|
Units |
List (see above) |
|
Input Restrictions |
As designed |
|
Baseline Rules |
Table 3.6.2-1 specifies the HVAC terminal device for each of the baseline building systems. See Figure 3.1.2-1 for a summary of the HVAC mapping. |
Table 3.6.2-1: Baseline Building HVAC Terminal Devices
|
Baseline System |
Terminal Type |
|
1 PTAC |
None |
|
2 PTHP |
None |
|
3 PSZ-AC |
None |
|
4 PSZ-HP |
None |
|
5 Packaged VAV with Reheat |
VAV Box |
|
6 Packaged VAV with PFP boxes |
Parallel Fan-Powered VAV Box |
|
7 VAV with Reheat |
VAV Box |
|
8 VAV with PFP boxes |
Parallel Fan-Powered VAV Box |
|
9 Heating and Ventilation |
None |
|
10 Heating and Ventilation |
None |
|
11 SZ–VAV |
VAV Box |
|
12 SZ-CV-HW |
None |
|
13 SZ-CV-ER |
None |
| Terminal Type | |
|---|---|
| Applicability | All HVAC zones |
| Definition |
A terminal unit includes any device serving a zone (or group of zones collected in a thermal zone) that has the ability to reheat or re-cool in response to the zone thermostat. This includes: · None (the case for single zone units) · VAV box · Series fan-powered VAV box · Parallel fan-powered VAV box · Induction-type VAV box · Dual-duct mixing box (constant volume and VAV) · Two- and three-duct mixing dampers (multi-zone systems) · Reheat coil (constant volume systems) · Perimeter induction units · Chilled beams · Radiant heating and cooling · Fan coil units · Variable refrigerant flow terminal units |
| Units | List (see above) |
| Input Restrictions | As designed |
| Baseline Building | Table 37 specifies the HVAC terminal device for each of the baseline building systems. See Table 3 for a summary of the HVAC mapping. |
Table 37. Baseline Building HVAC Terminal Devices
| Baseline Building System | Terminal Type |
|---|---|
| System 1 PTAC | None |
| System 2 PTHP | None |
| System 3 PSZ AC | None |
| System 4 PSZ HP | None |
| System 5 PV AV reheat | VAV with hot water reheat |
| System 6 Packaged VAV with PFP boxes | Parallel fan-powered boxes with electric reheat |
| System 7 VAV with reheat | VAV with hot water reheat |
| System 8 VAV with PFP boxes | Parallel fan-powered boxes with electric reheat |
| System 9 Heating and ventilation | None |
| System 10 Heating and ventilation | None |
| System 11 SZ-VAV | None |
| System 12 SZ-CV-HW | None |
| System 13 SZ-CV-ER | None |
| Terminal Type | |
| Applicability | All HVAC zones |
|---|---|
| Definition |
A terminal unit includes any device serving a zone (or group of zones collected in a thermal block) that has the ability to reheat or recool in response to the zone thermostat. This includes:
|
| Units | List (see above) |
| Input Restrictions | As designed |
| Terminal Type | |
| Applicability | All HVAC zones |
|---|---|
| Definition |
A terminal unit includes any device serving a zone (or group of zones collected in a thermal block) that has the ability to reheat or recool in response to the zone thermostat. This includes:
|
| Units | List (see above) |
| Input Restrictions | As designed |